
17
T-RINGS FOR 35MM CAMERAS
A T-Ring couples your 35mm camera
body to a T-Adapter, Radial Guider or
Tele-Extender. This accessory is required if
you want to do any type of photography
through a telescope or spotting scope.
Each camera manufacturer has a different
mount, which requires a specific T-Ring, so Celestron offers a full line of T-Rings.
To use a T-Ring, remove the diagonal and/or eyepiece from your telescope (some models
require use of an eyepiece — see your instruction manual). Then you need only remove your
normal camera lens, attach the proper T-Ring for your camera, and mount the combination
to the rear cell of your telescope or spotting scope with a Celestron T-Adapter.
If you own an older SLR camera with a thread mount, it will probably accept the Pentax
Universal Thread Mount T-Ring. If you have a new camera with a bayonet mount not listed
above (Ricoh, Cosina, etc.), it most likely accepts the Pentax K-Universal Bayonet Mount
T-Ring. Check your camera’s instruction manual for more detailed information.
CANON T-RING ADAPTERS
These T-Rings are designed to work with Canon or Canon
EOS brand 35mm cameras.
Model #93413 Canon T-Ring Adapter
Model #93419 Canon EOS T-Ring Adapter
93413
93419
MINOLTA T-RING ADAPTERS
These T-Rings are designed to work with Minolta or
Minolta Maxxum brand 35mm cameras.
Model #93400 Minolta T-Ring Adapter
Model #93418 Minolta Maxxum T-Ring Adapter
93400
93418
NIKON T-RING ADAPTER
This T-Ring is designed to work with Nikon brand 35mm cameras.
Model #93402 Nikon T-Ring Adapter
93402
OLYMPUS T-RING ADAPTER
This T-Ring is designed to work with Olympus brand 35mm cameras.
Model #93414 Olympus T-Ring Adapter
93414
PENTAX T-RING ADAPTERS
These T-Rings are designed to work with Pentax or Pentax
‘K’ brand 35mm cameras.
Model #93401 Pentax T-Ring Adapter
Model #93403 Pentax ‘K’ T-Ring Adapter
93401
93403
Comentarios a estos manuales